10kV630A欧式（小欧）屏蔽前接头
The 10/630 shielded front connector is a compact product design, which greatly reduces the installation space. The structure adopts a multi-layer structure: the inner layer of the cable head is a semiconductor shielding layer. In order to balance the internal electric field, the middle layer is an insulating layer. Made of imported high-quality insulating materials to ensure insulation strength. The outer layer of the cable head is a semi-conductive shielding layer to ensure that the outer shielding layer is grounded to maintain a zero potential. The inner layer of the lower end of the stress control body is in close contact with the semi-conductive layer of the cable; the outer semi-conductive shielding layer is in close contact with the outer semi-conductive shielding layer of the cable, and is grounded through the grounding hole on the contactable cable connector, which not only solves the problem of cable termination The electric field concentration problem where the outer shielding layer is cut off, and the outer shielding layer of the cable head (due to grounding) is maintained at zero potential to ensure the personal safety of maintenance operators and ensure the normal and reliable operation of the equipment.
10kV (24kV) 630A European-style second-generation shielded front connector
European-style second-generation front connectors are used in power distribution systems such as 10kV (20kV) cable branch boxes, ring network cabinets, and box substations. Used with 630A casing and 630A busbar. A live display can be installed at the test point.
The product is a fully insulated, fully sealed, and fully shielded product. The front and rear connectors are matched to realize the multi-branch power supply of the product. The front and rear connectors can be extended and connected to the lightning arrester to provide overvoltage protection for the power supply system.
The applicable cross section is 35~400mm².
10kV630A European-style third-generation shielded front connector
European-style third-generation 10kV shielded front connectors are mainly used in 10kV power distribution systems such as cable branch boxes, ring main cabinets, and box transformers. Used with 10kV630A casing.
The product is a fully insulated, fully sealed, and fully shielded product. The front and rear connectors are matched to realize the multi-branch power supply of the product. The front and rear connectors can be extended and connected to the lightning arrester to provide overvoltage protection for the power supply system.
The applicable cross section is 25～630mm².
HYLCJ-10/630 630A European second-generation unshielded front connector
The unshielded front connector is used in the main network and branch system of the European ring network cabinet, cable branch box and box-type transformer. It can form multi-channel and multi-style cable branches by connecting back and forth.
Rated current: 630A
The applicable cross section is 35～500mm².
20kV 630A European-style third-generation shielded front connector
