The HYDX live display is installed on the test hole of the cable head. It uses the live display to determine whether the cable is live. When the line is live, the display light of the live display flashes continuously to remind line inspectors that the line is live.
The live display is encased in semi-conductive rubber boots, fully insulated, fully sealed and adaptable to various climates.
Panel-type live display is mainly used for live display in cable branch boxes, and is suitable for electrical equipment with a rated frequency of 50Hz and a rated voltage of 40.5kV or less.
HYDXN-Q charged display
The HYDXN-Q charged display device consists of three sensors and a display connected by wires. It is suitable for electrical equipment with a rated frequency of 50Hz and a rated voltage of 40.5kV or less. It can not only reflect the charging status of the circuit, but also cooperate with the electromagnetic lock to achieve forced locking of switch handles, valves, etc. Both the live display and the forced locking are controlled by the same high-voltage signal, but the circuit systems are independent of each other and do not interfere with each other. As long as the high-voltage circuit is charged, even if the display circuit and the locking circuit fail at the same time, the electromagnetic lock is still in a locked state, preventing misoperation and accidentally entering the live interval.
