Insulator maintenance method

1. Power failure cleaning

Power cut cleaning means that workers climb the pole and wipe with a rag after the line is cut off. If it is not clean, you can wipe it with a damp cloth or detergent. If it is still not clean, you should replace the insulator or replace the synthetic insulator.

2. Clean without power failure

Generally, an insulating rod equipped with a brush or cotton yarn is used to wipe the insulator on the running line. The electrical performance and effective length of the insulating rod used, as well as the distance between the person and the live part, shall comply with the regulations of the corresponding voltage level, and special personnel must be supervised during operation.

3. Rinse with charged water

There are two methods: big water flushing and small water flushing. The flushing water, the effective length of the operating rod, the distance between the person and the live part, etc. must meet the requirements of the industry regulations.

Yichang Hengyuan Technology Co., Ltd. is a professional manufacturer of European-style cable connectors, plug connectors, cable branch boxes, American elbow connectors, high-voltage vacuum circuit breakers, high-voltage load switches, lightning arresters, zinc oxide arresters, tank arresters, overvoltage protectors, Counters, monitors, heat-shrinkable cable accessories, cold-shrinkable cable accessories, T-shaped heads, wall bushings, European cable accessories, American cable joints, transformer neutral point protection devices, fuses, isolating switches, PT cable heads, elbows Manufacturers of type cable joints, 10kV outdoor terminals, switch cabinets, cable intermediate joints, cable accessories and other products