American 600A second-generation T-type connectors are used to connect the incoming and outgoing wires of American cable branch boxes, American box substations or ring network cabinets with 600A bushings and 600A busbars. The product is equipped with a test head, which can provide a live display for the operation of the product.
This product is a fully insulated, fully sealed, fully shielded product, which can be extended to connect with rear connectors and rear arresters.
The applicable cross section is 35-400mm².
The combined product of the American second-generation 600A T-type connector and the second-generation load conversion head is referred to as the American second-generation T2 type connector. The product is used for the inlet and outlet of American cable branch boxes, American box transformers, and ring mains.
The 600A joint is connected with the 600A bushing and the 600A busbar, which conforms to the matching connection of the conversion head end with the 200A elbow joint and the 200A elbow arrester.
Use cross section 35~400mm²
American 600A third-generation T-type connectors are used to connect the incoming and outgoing wires of American cable branch boxes, American box substations or ring mains with 600A bushings and 600A busbars. The product is equipped with a test head, which can provide a live display for the operation of the product
This product is a fully insulated, fully sealed and fully shielded product, which can be extended to connect with 600A T-type connectors and 600A T-type arresters through intermediate connectors
Use cross section 25~500mm²
The combined product of the American third-generation 600A T-type connector and the third-generation load conversion head is referred to as the American-style third-generation T2 type connector. The product is used for the inlet and outlet of American cable branch boxes, American box transformers, and ring mains.
The 600A joint is connected with the 600A bushing and the 600A busbar, which conforms to the matching connection of the conversion head end with the 200A elbow joint and the 200A elbow arrester.
Use cross section 25~500mm²
